English (United States) 
Deutsch (DE) Frame Heaters, ceramic insulated
Frame Heating elements Ceramic insulated KRH
Ceramic insulated heating elements are used especially when high process temperatures and outputs ( W/cm²) are required.
Heat is mainly transferred as radiant heat.
| Length | ≥ 40 mm - 1990 mm |
| Width | ≥ 40 mm - 1990 mm |
| Width | ≥ 40 mm - 990 mm |
|
Wall Thickness
|
from 12 mm |
| Voltage |
up to 440 V |
| Power | as requested, up to the maximum possible watt density |
| Specific Electric Power | bis 7,5 W/cm² |
| Power tolerance | +/- 10% |
| High-voltage Strength | 1000 VAC |
| Insulation Resistance | 1 MOhm (500VDC) in cold condition |
| Protection Class | IP 40 |
| Temperature | bis 450°C |
| Material | Steel / stainless steel / aluminum |
| Connection cable | Nickel cable with glass fiber insulation, steel braid sheathed |
Options:
Drill holes and cut-outs
Connection for
external temperature sensorsIntegrated temperature sensors
with thermal insulation
as L-shape or U-shape
Special shapes
Multi-part design
with separate connections
Cable connection via terminals
In this version, the cable is connected via terminals. This connection version can be supplied with or without cable.
The cable outlet can be designed axially, radially or tangentially as required.
Fixed connection
In this version, the cable is connected via terminals. This connection version can be supplied with or without cable.
The cable outlet can be designed axially, radially or tangentially as required.
Plug connection
The connection is made using a practical plug contact that is integrated into the connection fitting. If you wish, we can supply you with suitable mating connectors or pre-assembled connection cables for your specific application.
For additional security against accidental disconnection of the plug connection, we offer an optional locking clip.
It is also possible to design the cable outlet either axially, radially or tangentially according to your requirements.
With integrated temperature sensor
A temperature sensor is positioned under the connection cap for temperature measurement. The temperature in the heating element is measured. Special versions possible.
Versions:
- Thermocouple Fe-CuNi Typ J, Ni-CrNi Typ K,
- Resistance sensor PT 100
- Potential-bound or potential-free
- Thread: M12, M12x1, M14x1,5, R3/8"
With hole and threaded connection for external temperature sensor
To measure the surface temperature of the object to be heated with an external temperature sensor, the heating element has a hole and a bracket with a threaded hole. A nipple can be screwed in here to which the external bayonet sensor can be attached.
Versions:
- Thermocouple Fe-CuNi Typ J, Ni-CrNi Typ K,
- Resistance sensor PT 100
- Potential-bound or potential-free
- Thread: M12, M12x1, M14x1,5, R3/8"
