English (United States) 
Deutsch (DE) 
Flat Heater, Ceramic-insulated
Flat Heaters, Ceramic-Insulated KHB
Mickenhagen ceramik insulated heating plates are used for the external heating of moulds and tools. Our product range includes both standard heating elements for all common plastics processing machines in the injection moulding and extrusion sectors as well as individual special solutions for process engineering applications up to 450°C.
Length | ≥ 21 mm - 1990 mm |
Width | ≥ 21 mm - 990 mm |
Wall thickness | ≥ 12 mm |
Voltage | up to 440 V |
Power | as required up to the maximum |
Specific power | up to 7,5 W/cm² |
performance tolerance | +/- 10% |
high voltage stability | 1000 VAC |
insulation resistance | 1 MOhm (500VDC |
Protection class | IP 40 |
operating temperature | up to 450°C |
Material | Steel / stainless steel / aluminum |
Connection cable | Nickel cable with |
|
|
Optionen:
Drill holes and cut-outs
Connection for
external temperature sensorsIntegrated temperature sensors
with thermal insulation
Heating element integrated in
milled aluminum plateSpecial shapes
Temperatures up to 650°C possible, depending on the application
Cable connection via terminals
In this version, the cable is connected via terminals. This connection version can be supplied with or without cable.
The cable outlet can be designed axially, radially or tangentially as required.
Fixed connection
In this version, the cable is connected via terminals. This connection version can be supplied with or without cable.
The cable outlet can be designed axially, radially or tangentially as required.
Plug connection
The connection is made using a practical plug contact that is integrated into the connection fitting. If you wish, we can supply you with suitable mating connectors or pre-assembled connection cables for your specific application.
For additional security against accidental disconnection of the plug connection, we offer an optional locking clip.
It is also possible to design the cable outlet either axially, radially or tangentially according to your requirements.
With integrated temperature sensor
A temperature sensor is positioned under the connection cap for temperature measurement. The temperature in the heating element is measured. Special versions possible.
Versions:
- ThermocoupleFe-CuNi Typ J, Ni-CrNi Typ K,
- Resistance sensor PT 100
- Potential-bound or potential-free
- Thread: M12, M12x1, M14x1,5, R3/8"
With hole and threaded connection for external temperature sensor
To measure the surface temperature of the object to be heated with an external temperature sensor, the heating element has a hole and a bracket with a threaded hole. A nipple can be screwed in here to which the external bayonet sensor can be attached.
Versions:
- Thermocouple Fe-CuNi Typ J, Ni-CrNi Typ K,
- Resistance sensor PT 100
- Potential-bound or potential-free
- Thread: M12, M12x1, M14x1,5, R3/8"
With perforated sheet metal cover
Milled aluminum heating plate
